Sunday, August 19, 2007

IPv6 basics for ethernet and frame-relay

1 - Next hop of any dynamically learned router is link local address of the neighbor untill unless specified in incoming update.

2 - For frame-relay map statement link-local address is required.explicit mappings are required between the link-local and global IPv6 addresses also.

3 - Though IPv6 does not have any broadcast address so no need to have broadcast keyword in frame-relay map statement for gloable unicast ipv6 address.

4 - Frame-relay inverse ARP function is not there means IPv6 doesn't support any inverse ARP function.

5 - show IPv6 route legend L = Locally connected interface IPv6 address.

6 - For pinging to link-local and site-local addresses we need to define the outgoing interface। because as per the IPv6 address table given above link-local addresses may be duplicated in the same router by using same MAC-address. So to identify by which outgoing interface packets need to go out is not decidable.
7 - Split horizon for IPv6 is enable by default.
8 - Poison reverse is off by default.
9 - I didn't see any passive interface option in RIP.
Thanks
CCIENotes

4 comments:

generic viagra online said...

Hey this is a nice post shared here. Great job done. Thanks for sharing this.

generic for xanax said...

I've been around for quite a lot of time, but finally decided to show my appreciation of your work!

Kamagra said...

Hi friend ........... this is a nice blog i like it And thanks for share for information...........Keep it up............

Unknown said...

That was a really nice blog buddy, very informative.i recently did a course,from Horizon computers.i would recommend networking enthusiast to learn from the experts of networking.